sanjing

新闻资讯banner

Time of issue:2020-07-15 00:00:00
contact

News

/
/
/
Knowledge about SMT equipment maintenance

Knowledge about SMT equipment maintenance

(Summary description)We know that the general SMT is divided into three parts, one is the hardware (HARDWARE), the process (PROCESS) and the program (PROGRAM).
Hardware is the foundation of the entire SMT. Without hardware equipment, there will be no process and program. This is also true in practical applications. However, under normal circumstances, people are generally more concerned about the SMT process than the hardware and the program. The following Sanjing will take you to understand:
Most of the manufacturing process is controlled by the temperature profile (PROFILE), and the adjustment of the temperature profile is also based on the hardware. However, sometimes due to patching, there may be problems in the manufacturing process, and most of the problems caused by patching are related to hardware. Therefore, SMT equipment maintenance is essential. If the SMT equipment is properly...

Knowledge about SMT equipment maintenance

(Summary description)We know that the general SMT is divided into three parts, one is the hardware (HARDWARE), the process (PROCESS) and the program (PROGRAM).
Hardware is the foundation of the entire SMT. Without hardware equipment, there will be no process and program. This is also true in practical applications. However, under normal circumstances, people are generally more concerned about the SMT process than the hardware and the program. The following Sanjing will take you to understand:
Most of the manufacturing process is controlled by the temperature profile (PROFILE), and the adjustment of the temperature profile is also based on the hardware. However, sometimes due to patching, there may be problems in the manufacturing process, and most of the problems caused by patching are related to hardware. Therefore, SMT equipment maintenance is essential. If the SMT equipment is properly...

Information

We know that the general SMT is divided into three parts, one is the hardware (HARDWARE), the process (PROCESS) and the program (PROGRAM).

 

Hardware is the foundation of the entire SMT. Without hardware equipment, there will be no process and program. This is also true in practical applications. However, under normal circumstances, people are generally more concerned about the SMT process than the hardware and the program. The following Sanjing will take you to understand:

 

Most of the manufacturing process is controlled by the temperature profile (PROFILE), and the adjustment of the temperature profile is also based on the hardware. However, sometimes due to patching, there may be problems in the manufacturing process, and most of the problems caused by patching are related to hardware. Therefore, SMT equipment maintenance is essential. If the SMT equipment is properly maintained and is always in an ideal state when working, the defective product rate in the production process will also be reduced. However, most SMT manufacturers do not pay much attention to this problem and always put production first. They do not realize that this will not only increase the burden on equipment components, but also reduce the accuracy of the equipment in the long run, thus shortening the equipment to a large extent. Service life.

 

Some manufacturers, even if they do conscious maintenance, have to wait until the machine is aging and broken. There is no spare parts management and ordering plan, no fixed maintenance plan, preventive maintenance, and no breakdown time record and analysis. This kind of maintenance To a large extent, the method does not have much effect. Waiting for the machine to be repaired and maintained when it is aging and broken will cause production to stop and increase the burden of production.

 

Therefore, in terms of SMT equipment maintenance, it is necessary to formulate a detailed periodic maintenance plan, regularly overhaul and maintain production equipment, and avoid a series of production problems caused by equipment failures as early as possible, which not only can effectively guarantee daily production , And will not affect production due to sudden equipment failure.

 

The above is the knowledge about SMT equipment maintenance, I hope it can be helpful to everyone!

Scan the QR code to read on your phone

Relevant News

There is currently no information to display
Please add data record on website background.

Payment Method

Payment Method

Delivery Services

Delivery Services

Verified ty

Verified ty

Quick Contact

Username used for comment:
Quick Contact
Description:
qr

WeChat

Copyright©Sanjing Electronic Technology Co., Ltd.  All Rights Reserved  粤ICP备09210657号